Home > Error Code > Proxy Plus Error Code 10061

Proxy Plus Error Code 10061

Contents

Socket error = #10060. Based on the original by Alex Kunadze. Do a traceroute to the destination to verify all routers along the connection path are operational. (See Troubleshooting Tips for details.) Verify that your subnet mask is setup properly. For more error code information, refer to Knowledge Base article 10140 at http://kb.globalscape.com. have a peek here

Try pinging the address. (See Troubleshooting Tips for details.) If you are using a router, verify the router is up and running (check by pinging it and then ping an address A server that is running a service on port 80 will respond with a SYN ACK, but if it is not, it will respond with a RST ACK. Last modified: 2012-01-25 Increase the connection timeout threshold under Global Settings > Connection. http://www.proxyplus.cz/viewmsg.php?lang=en&id=7271

Adb No Connection Could Be Made Because The Target Machine Actively Refused It. (10061)

How to repair Error Code 10061 in ISA: Connection refused There are times when you might come across a ‘Connection Refused’ error while using Microsoft’s ISA 2006 or Forefront TMG 2010 If you still receive a 10060 error, the server may be trying to send a listing for a very large directory (with many thousands of files) causing the client to time-out Verify that the destination host name or IP address is correct and try again later. Try pinging the address.

  1. Verify that the problem is not local by trying to connect to an alternate server.
  2. In the Port box, type the correct port number.
  3. Either one may be blocking the ports needed to make a successful FTP connection to the server.

Either can block the ports needed to make a successful FTP connection to the remote server. On the main menu, click File > Properties. Usually, the manufacturer of the device or software has specific instructions available on their Web site. Error 10061 Connection Refused Sql Server GFI is a leading software developer that provides a single source for network administrators to address their network security, content security and messaging needs.

While this covers the most common 10061 errors you may encounter, feel free to ask about any other situations in the comments, and I will get back to you promptly with Verify that the destination server name or IP address is correct Verify that the connection port number is correct (under Site Settings > Type tab). The client may be presented with an error message in the browser that looks something like this: Error Code 10061: Connection refused Background: When the gateway or proxy server contacted the try this In both cases, let’s focus on the key word ‘refused’.

Did this topic solve your problem/answer your question? * For the most up-to-date information regarding CuteFTP, * To view version history, updates, and activation instructions, * To download a PDF of Error Code 10061 Connection Refused Localhost Download free trial! If you continue to receive the same error after insuring ports 20 and 21 are open, contact the administrator of the site you are trying to connect to. There are a few things that could cause this, and how to address them depends on the direction in which the proxying is happening.

Error Code 10061: Connection Refused

The remote server may be temporarily or permanently inaccessible (try again later). WSAETIMEDOUT (10060) 10060 is a connection-timeout error that usually appears when the client does not receive a response from the server for a specific command. Adb No Connection Could Be Made Because The Target Machine Actively Refused It. (10061) To change your connection Port for an FTP site Open the Site Manager, then click the site. Error 10061 Connection Refused Again, your ISA/TMG is communicating with your internal server, but with the IIS stopped, the server responds with a RST ACK since nothing is listening on TCP 80.

You’ll be back in business in no time. http://doinc.org/error-code/proxifier-error-10061.html In this brief post, we shall assess how this can be done. Copyright © 1996-2011 GlobalSCAPE, Inc. The remote server may be refusing multiple connections from the same client. Error Code 10061 Connection Refused Solution

The other way is for a firewall to block the connection, rather than drop it. If you are using a router, verify the router is up and running (check by pinging it and then ping an address outside of the router). Usually the manufacturer of the device or software will also have specific instructions available on their Web site. http://doinc.org/error-code/proxy-error-10061.html ERROR:> Can't connect to remote server.

If using a local server table for server name resolution, check to see that it doesn't resolve to an obsolete address. Error Code 404 System Error Code 10061 In Tally A dropped connection would eventually time out, with the error message 10060, which we may look at in another post. Your ISA/TMG reaches the server, but not the intended service.

WSAESERVERUNREACH (10065) The server is unreachable.

Unauthorized reproduction forbidden. Socket Errors 10060, 10061, 10064, 10065 A socket error in the 10060 range is a Winsock error. Verify that the destination IP address is correct. Copyright © 2002-2015 ChicagoTech.net, All rights reserved. How To Fix Error Code 10061 The remote host actively refused the attempt to connect to it.

WSAECONNREFUSED (10061) 10061 is a Connection Refused error sent to you by the server. All rights reserved. This error often occurs when you try to connect in PASV mode to a server that prefers PORT for data connections. this contact form The repair here is as simple as a quick restart of IIS, or specifying the correct port in the bridging configuration.

Verify that your subnet mask is setup properly. Verify that the destination host name or IP address is correct and try again later. It is generally caused by either outgoing connection problems or connection problems on the host end. Your ISA or TMG server was able to reach the destination server, but that server responded with a message that tells the ISA/TMG server that it cannot have the requested data.

This is one way a server could “actively refuse” a connection attempt. Fixing this depends on what the root cause is – which isn’t always easy to determine. This guest post was provided by Ed Fischer on behalf of GFI Software Ltd. WSAESERVERDOWN (10064) The server is temporarily or permanently unreachable.

If you see an error log similar to the one below, in the Site Properties of the problem site, click the Type tab, then change the Data Connection Type to Use Sometimes a 10061 error is caused by either a firewall or anti-virus software presence on the local computer or network connection. Please consult the documentation or help file for your specific firewall or antivirus software product for further instructions. This usually results from trying to connect to a service that is inactive on the upstream server While the server activity log will show this: Failed Connection Attempt Log type: Web

Consult the documentation or help file for your specific firewall or antivirus software product for instructions. But if a firewall is configured to block a connection, it will usually respond with a RST ACK to TCP connections that it is configured to block, just as a server Remember how TCP works. For a regular FTP session, please either disable the firewall or anti-virus software or configure it to allow CuteFTP to establish an FTP session over ports 20 and 21.

More information: GFI web filtering solution All product and company names herein may be trademarks of their respective owners.